Solving common problems in extruder screw operation is crucial for ensuring efficient and consistent plastic or polymer processing. Here is a summary of the issues and reasons:

1. Insufficient or uneven melt temperature: This may be caused by incorrect setting of the barrel heating zone or malfunction of the temperature control system. Ensure that the temperature setting is correct and the heater is functioning properly.

2. Excessive wear or damage to the screw: Over time, the screw in the extruder will wear or damage, leading to a decrease in performance. Regularly check the screws for signs of wear or damage, and replace them if necessary.

3. Inconsistent feeding: If the material is fed unevenly into the extruder, it may cause changes in the final product. Check the feeding system for any obstacles or blockages and ensure that the material is correctly fed into the extruder.

4. Poor quality or inconsistent output: If the extruder cannot produce consistent or high-quality output, it may be due to various factors, such as incorrect screw design, incorrect temperature setting, or insufficient melt pressure. Check these factors and make corresponding adjustments.

5. Screw motor problem: If the screw does not rotate as expected or does not rotate at all, it may be caused by a motor problem. Check the motor connection and ensure that it is powered on and functioning properly.

6. Excessive motor load or power consumption: If the motor consumes more power than usual or it is difficult to drive the screw, it may indicate a problem with the screw, such as excessive wear or damage. Check for any issues with the screw and motor, and make necessary repairs or replacements.

7. Screw slipping or loss of synchronization: If the screw slips or loses synchronization with the motor, it can lead to poor extrusion performance. Check the drive system, including belts, gears, or couplings, for any signs of wear or damage, and make necessary adjustments or replacements.

8. Material degradation or combustion: If the material degrades or burns during the extrusion process, it may indicate excessive shear or residence time in the extruder. Adjust the screw speed or contour to reduce shear and residence time, and if necessary, consider using materials with better thermal stability.

9. Screw cleaning or maintenance issues: Regular cleaning and maintenance of screws is crucial to ensure optimal operation. If the screw is not properly cleaned or regularly maintained, it may lead to accumulation or corrosion, affecting the extrusion process. Please follow the manufacturer's recommended cleaning and maintenance procedures.

10. Insufficient cooling of the screw: In some cases, excessive heat accumulation on the screw may lead to problems such as material melting or premature degradation. Check the cooling system of the screw, including water flow and temperature, and make adjustments as necessary to ensure proper cooling.